DI-8B33 Isolated True RMS Input Modules
100mV to 300V RMS Input Range
Nyckelfunktioner
- Interfaces RMS Voltage (100mV to 300V)
- Designed For Standard Operation With Frequencies of 45Hz to 1kHz (Extended Range to 20kHz)
- Compatible With Standard Current and Potential Transformers
- ±0.25% Factory Calibrated Accuracy (Accuracy Class 0.2)
- 1500 VRMS Continuous Transformer Based Isolation
- Input Overload Protected to 480V Max (Peak AC and DC) or 10A RMS Continuous
- ANSI/IEEE C37.90.1-1989 Transient Protection
About the DI-8B33 Isolated True RMS Input Modules
DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B33 module isolates, filters and amplifies a True RMS input signal and provides an analog voltage output.
Signal filtering is accomplished with a three-pole filter optimized for time and frequency response which provides 70dB of normal-mode-rejection at 60Hz. One pole of this filter is on the field side of the isolation barrier for anti-aliasing, and the other two are on the system side.
A special input circuit on the DI-8B33 module provides protection against accidental connection of power-line voltages up to 30VAC.
Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.
The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expert