M14 5.2.2 Universal Vibration Monitor

---

Nyckelfunktioner

• Extremely flexible
• True RMS and true peak measurement
• Programmable high pass and low pass frequencies
• 500 lines FFT with 10 free adjustable alarm bands for frequency selective monitoring
• 2 Relay outputs with adjustable threshold for warning and alarm
• Insulated current loop output (4 .. 20 mA) for RMS or peak
• AC output for signal analyzers, recorders or scopes

---

About the M14 5.2.2 Universal Vibration Monitor

• Vibration monitoring in time or frequency domain
• Monitoring of vibration velocity (severity) of rotating machinery to ISO 20816-1 (formerly ISO 10816-1) and reciprocating engines to ISO 10816-6
• Monitoring of bearing vibration with frequency analysis
• Remote maintenance via RS-485 connection to PLC
• Visualization of machine condition via digital networks
• Emergency shut-off or alarm tripping in case of increasing vibration, e.g. at pumps, compressors, centri-fuges, fans, mixers, mills etc.
• Production quality control

Properties

• Extremely flexible
• Setup and measurement via RS-485 bus at rear and front side USB interface
• Monitoring of vibration acceleration or velocity
• True RMS and true peak measurement
• Programmable high pass and low pass frequencies
• 500 lines FFT with 10 free adjustable alarm bands for frequency selective monitoring
• 2 Relay outputs with adjustable threshold for warning and alarm
• Teach-in function sets the warning / alarm limits auto-matically based on the current vibration level / spectrum
• Insulated current loop output (4 .. 20 mA) for RMS or peak
• AC output for signal analyzers, recorders or scopes
• LED bar graph display for vibration signal and threshold
• Time-saving installation by snap attachment on 35 mm DIN rails including connection of power supply and RS-485 via DIN rail connectors

---