VIB-M29 IEPE konditioneringsmoduler
IEPE Sensor Supply Unit
Nyckelfunktioner
- Modular system
- Two plugs in the sidewall provide mechanical and power supply connection to the neighboring unit
- Mounting adapter for 35 mm DIN rails optionally available
- Rugged and compact aluminum case
- Sensor status LED indicates 3 conditions: OK, cable break and shorted sensor cable
- Powered by DC voltage via circular DIN 45323 connector or two 4 mm banana sockets at the sidewall
- Wide supply voltage range, also from USB voltage
- Insulation between signal ground and power supply voltage avoids grounding problems
- Flexible and economic
About the VIB-M29 IEPE Conditioning Modules
Application
- Signal conditioning for dynamic measurements with IEPE transducers for acceleration, force, pressure or IEPE microphones
- Multichannel systems
- Suitable for industry, laboratory and field due to compact design and wide supply voltage range
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Voltage gain | 1 |
| Accuracy | ±0.5 (>1 % of full scale) % |
| Output noise | <0.003 (0.1 to 100000 Hz) mVRMS |
| Lower frequency limit acceleration | 0.1 Hz |
| pper frequency limit acceleration | >100000 Hz |
| Indicators | Power LED, IEPE LED: OK; cable break; short circuit |