ALF209 Donut Ring Force Sensor
Ideally suited to engineering force measurements where overall height is restricted
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 350 Ω |
| Creep - 20 minutes | ±0.1% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Force direction | Compression |
| Hysteresis | ±1.0% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Measurement range | 1MN, 2MN, 4MN |
| Non-linearity - terminal | ±1.0% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 400% RL |
| Rated output - nominal | 1.2mV/V |
| Rated output - rationalised (1000 and 2000kn) | 1.0mV/V |
| Rationalisation tolerance | ±0.5% RL |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.03% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 7 to 9kg |
| Zero load output | ±4% RL |
Relaterade produkter
Behöver du något annat?
ALF210 Donut Ring Force Sensor
- Measuring range: ~7.5 kN to ~50 kN
- Designed for easy installation
- Can indirectly measure tensile loads
ALF313 Low-profile Donut Ring Force Sensor
- Measuring range: ~10 kN to ~200 kN
- Ranges to suit bolt sizes from M6 to M36
- Various designs possible on request
ALF207 Load Washer
- Measuring range: ~10 kN to ~200kN
- For spaces with restricted height
- Various designs possible on request