Model 13 Miniature Compression Force Sensor
Subminiature force sensor
Nyckelfunktioner
- 0.7% accuracy
- mV/V output
- Subminiature design
- Single diaphragm construction
About the Model 13 miniature compressive force sensor
The Model 13 (compression only) subminiature force transducer is designed to measure load ranges up to 4kN. With subminiature dimensions, including diameters from 0.38 in to 0.75 in and heights from 0.13 in to 0.25 in, these units are easy to incorporate into systems with limited space.
Model 13 combines high frequency response with low deflection to achieve combined nonlinearity and hysteresis of 0.25% to 0.5% full scale. A balance module for temperature compensation is included in the measurement cell cable and may not be removed.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Hysteresis | ±0.5% of FS |
| Linearity | ±0.5% of FS |
| Load direction | Compression only |
| Non-repeatability | ±0.1% of FS |
| Range | 1,5 - 5kN |
| Resolution | Infinite |
| Temperature, operating | -54°C to 121°C |
| Tolerance on output 1000g | 1.5mV/V (nominal) |
| Tolerance on output 150g to 500g | 15mV/V (nominal) |
| Tolerance on output 5lb to 1000lb | 2mV/V (nominal) |
Relaterade produkter
Behöver du något annat?
Model 31E Miniature Tension and Compression Force Sensor
- Measuring range: 0.5 N to 50 kN
- 0.15 % to 0.25 % accuracy
- Can be welded for underwater applications
Model 53E Compact High Precision Force Sensor
- Measuring range: up to 200 kN
- For cost-efficient production & testing
- Maximum non-linearity of 0.25% F.S.
