FN3280 S-beam Force Sensor
Designed to measure low force
Nyckelfunktioner
- High accuracy
- Tension and compression
- Integrated mechanical stops
- Full wheatstone bridge
- Cable output
About the FN3280 S-beam Force Sensor
The FN3280 S-beam load cell is designed to measure low force and has standard ranges of 1 to 5 N [0.2 to 1 lbf].
Integrated mechanical stops protect against accidental overloads up to 100 times F.S. The FN3280 provides a combination of economy and performance, this low cost load cell has an accuracy of 0.1% F.S.
To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.
Applications for FN3280
- Process control equipment
- Medical instruments
- Weighing
- Laboratory and research
- Calibration test benches
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Accuracy | 0.1% F.S. |
| Full scale range | 1N, 2N, 5N |
| Load direction | Tension and compression |
| Material | Body and cover in aluminum alloy |
| Output signal | ±1.5 mV/V |
| Protection | IP50 |
Relaterade produkter
Behöver du något annat?
FN7110 S-beam Force Sensor
- Measuring range: 10/100 N to 1k/10 kN
- Overload protection up to 12x F.S.
- Two ranges in the same loadcell
FN9620 S-beam Force Sensor
- Measuring range: 500 N to 10 kN
- IP68 protection rate-1m water column
- High tensile strength Stainless Steel
FN3030 S-beam Force Sensor
- Measuring range: ~50 N to ~100 kN
- 0.1% F.S. accuracy
- Well suited for customization