1. Althensensors
  2. Sensorer
  3. Linjära positionsgivare
  4. Explosionssäkra positionssensorer (EX/ATEX)
  5. M115 (Submersible) Linear Inductive Position Sensor

M115 (Submersible) Linear Inductive Position Sensor

Affordable, durable, high-accuracy position sensor


Nyckelfunktioner

  • Travel set to customer's requirement
  • Compact and self-contained
  • High durability and reliability
  • High accuracy and stability
  • Sealing to IP68 - 10 Bar
  • Intrinsically safe for Mining to: Ex I/II M1/1GD
  • Non-contacting inductive technology to eliminate wear

About the M115 (Submersible) Linear Inductive Position Sensor

The M115 is a heavy-duty version of the M114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors which are to be mounted horizontally between rod eyes. It remains an affordable, durable, highaccuracy position sensor designed for applications where the sensor would be completely submerged during normal operation.

The incorperated electronics system is ATEX / IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments.

Overall performance, repeatability and stability are outstanding over a wide temperature range. It provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 5mm to 800mm and with full EMC protection built in.

The sensor is very robust, the body and push rod being made of 316 stainless steel for long service life and environmental resistance

The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end. Captive push rods can be sprung loaded, in either direction. Environmental sealing is to IP68 10 Bar.

As a leading supplier of linear, rotary, tilt and intrinsically safe position sensors, Althen has the expertise to supply a sensor to suit a wide variety of applications.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Body diameter 35mm
Frequency response >10KHz (-3dB)
Independent linearity ±0.1% to ±0.5%
Measurement range Up to 800mm
Output signal 0.5-4.5VDC ratiometric
Sealing IP67

Relaterade produkter

Behöver du något annat?

M117 Linear Inductive Position Sensor

  • Compact 19mm diameter body
  • High accuracy and stability
  • Sealing to IP67
Visa produkt

M118 Linear Inductive Position Sensor

  • High durability and reliability
  • High accuracy and stability
  • Sealing to IP67
Visa produkt

M133 Linear Inductive Position Sensor

  • Short body length
  • Accurate, stable, durable and reliable
  • Sealing to IP67
Visa produkt