HCD Series LVDT Position Sensor
The perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants
Nyckelfunktioner
- Heavy duty model
- Measurement range: 1.27 to 254mm
- Non-linearity: ±0.25% FR
- Output: ±10VDC
- Frequency response: 500Hz or 200Hz
About the HCD series Hermetically Sealed
The HCD Series LVDTs are impervious to dirt, water, steam spray and most corrosives. Tungsten inert gas (TIG) welding provides hermetic sealing that is free from oxidation-producing faults that may cause leakage. They have been qualified at pressures up to 1000 psi (70 bars) and are suitable for numerous high-pressure applications. They are terminated with a glass-sealed, MS-type terminal connector. The connector prohibits the core from passing completely through the coil assembly. HCD units have double magnetic shielding that makes them insensitive to external magnetic influences.
Applications for HCD
- Harsh Industrial Environments
- Ideal for Pressure Installations up to 1,000 psi
- Submersible with Appropriate
- Connector
Options
- Metric Thread Core
- Captive Core Option for Convenient Installation
- Guided Core
- Small Diameter, Low Mass Core
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Coil form material | High Density, Glass-Filled Polymer |
| Electrical termination | 6-pin Connector |
| Null voltage | 0 VDC |
| Ripple | Less than 25 mV rms |
| Shock survival | 250 g for 11 milliseconds half sine |
| Stability | 0.125% full scale |
| Survival temperature range | -65°F to 200°F (-55°C to 95°C) |
| Temperature – coefficient of scale factor | 0.04%/°F (0.08 %/°C) |
| Vibration tolerance | 10 g up to 2 kHz |
Relaterade produkter
Behöver du något annat?
HCI-Series LVDT Position Sensor
- High input impedance
- IEC IP68 rating to 1,000 PSI [70 bars]
- Shock and vibration tolerant
HCT Series LVDT Position Sensor
- Measurement range 6.35 to 254mm
- Non-linearity ±1% to ±0.5% FR
- Output 4-20mA
HLR-Series LVDT Position Sensor
- UL/ULc, ATEX listed
- Ranges of ±1 inch to ±10 inches
- All stainless steel construction