1. Althensensors
  2. Sensorer
  3. Roterande lägesgivare
  4. Sensorer/roterande-laegesgivare/vinkel-potentiometrar
  5. FCP22A Single-turn Potentiometer

FCP22A Single-turn Potentiometer

Conductive plastic - Servomount


Nyckelfunktioner

  • Conductive plastic
  • Dimensions D x L (mm): 22.23x15
  • Standard Resistance Range 1 Ω to 10 kΩ
  • Independent Linearity (± %): 1.0 to 0.25
  • Mechanical travel (+10° 0°): 360°
  • Electrical travel (±5°): 320° ±5°

About the FCP22A Single-turn Potentiometer- Conductive plastic (Servomount)

The FCP22A is a servomount type potentiometer with ball bearings, a 22mm outer diameter and turret side terminals.

Special Specifications

Extra taps (available up to 1 tap), multi-ganged (available up to 5 gangs, housing length is extended by 8.5mm per 1 gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Contact resistance variation Within 2% C.R.V.
Dielectric strength 1 minute at 1,000 V.A.C.
Electrical travel 320º ±5º
Independent linearity tolerance Standard Class ±1.0%, Precision Class ±0.5%, Super precision Class ±0.25%
Insulation resistance Over 1,000MΩ at 1,000 V.D.C
Mass Approx. 20g
Mechanical travel 360º (Endless)
Output smoothness Within 0.1% against input voltage
Power rating 1.0W
Resistance temp. coefficient ±400p.p.m./ºC
Resolution Essentially infinite
Shaft diameter (mm) 3
Special practical resistance values 200, 500, 20k, 50k, 100k (Ω)
Standard resistance values 1k, 2k, 5k, 10 k (Ω)
Starting torque Within 1.5mN·m (15gf·cm)
Total resistance tolerance Standard Class ±10% (K)

Relaterade produkter

Behöver du något annat?

FCP30A Single-turn Potentiometer

  • Resistance range 1 Ω to 10 kΩ
  • Servomount type with ball bearings
  • Essentially infinite resolution
Datablad Visa produkt

FCP40A Single-turn Potentiometer

  • Servomount - Conductive plastic 
  • Dimensions (D x L) 36.5x18 mm
  • Standard Resistance Range 1 Ω to 10 kΩ
Datablad Visa produkt

FCP50A Single-turn Potentiometer

  • 51mm outer diameter
  • Servomount type with ball bearings
  • Various special specifications available
Datablad Visa produkt