DD Series Strain Gauges for One Side Strain Measurement
Measure the bending and tensile strains separately by simply bonding the gauges on one side of a plate
Nyckelfunktioner
- 0.15% (1500×10⁻⁶ strain) Strain limit
- Fatigue life: 1×10⁵ (±1000×10⁻⁶strain)
- Operational temperature: -10~+70°C
- Acrylic backing, Cu-Ni element
- Gauge resistance: 350Ω
- Gauge length: 3mm
- Type: Single element, for measuring bending and tensile strains separately
About the DD Series for One Side Strain Measurement
DD series one-side strain gauge
These gauges are intended for measuring the bending and tensile strains separately by simply bonding the gauges on one side of a plate or beam. It works on the assumption that the strain distribution in the section of the specimen is linear along the height of the section when the section is subjected to both tensile and bending stress. The gauges are effectively used for the measurement of a box construction in structures such as bridges or pressure vessels, where the reverse side of the measurement object is not accessible for strain gauge installation.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Applicable specimen | Metal |
Backing | Acrylic |
Bonding adhesive | CN, P-2 |
Element | Cu-Ni |
Fatigue life at room temperature | 1×10⁵ (±1000×10⁻⁶strain) |
Operational temperature(°c) | -10~+70°C |
Strain limit | 0.15% (1500×10⁻⁶ strain) |
Temperature compensation range(°c) | - |