MFLA Series Strain Gauges for Use in Magnetic Field
Single element for strain measurement in magnetic field
Nyckelfunktioner
- 1% (10000×10⁻⁶ strain) Strain limit
- Operational temperature: -20~+80°C
- Special plastics backing, Ni-Cr element
- Gauge resistance: 350Ω
- Gauge length: 2, 5, 60mm
- Type: Single element, for strain measurement in magnetic field.
About the MFLA Series for Use in Magnetic Field
MF series magnetic field strain gauge
These gauges are designed for strain measurement in magnetic field. The gauges have a sensing element material which exhibits low magnetoresistance. In addition, the sensing element consists of two identical grids with one grid folded back on another. These construction makes the strain gauges less sensitive to the influence of the alternating field. The gauges have a twisted leadwire pre-attached which is also effective to avoid the influence of the alternating field. The dual element and 3-element rosette gauges of this series are usable in high temperature up to 200°C.
Temperature compensation materials
- 11: Mild steel
- 17: Stainless steel
- 23: Aluminium
Several integrated leadwire options available.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Applicable specimen | Metal, concrete |
| Backing | Special plastics |
| Bonding adhesive | CN, CN-E, RP-2 |
| Element | Ni-Cr |
| Fatigue life at room temperature | 1×10⁶ (±1500×10⁻⁶ strain) |
| Operational temperature(°c) | -20~+80°C |
| Strain limit | 1% (10000×10⁻⁶ strain) |
| Temperature compensation range(°c) | - |