SFA Series for Axial Stress Strain Gauges
Intended to measure the stress in an optional direction of the specimen in plane stress field
Nyckelfunktioner
- Fatigue life: 1×10⁶ (±1500×10⁻⁶ strain)
- Operational temperature: -20~+200°C
- +10~+100°C temperature compensation
- Gauge resistance: 120Ω
- Gauge size: 4mm
- Poisson's ratio of specimen: 0.285, 0.305, 0.330
About the SFA Series for Axial Stress Straingauge
SF series stress gauge
These gauges are intended to measure the stress in an optional direction of the specimen in plane stress field. The gauges are sensitive not only in these axial direction but also in the transverse direction, and the sensitivity ratio of the transverse direction to the axial directions is equal to the Poisson’s ratio of the specimen material. In addition, the gauges are not sensitive to the shearing strain. Accordingly, the output of the gauges is proportional to the stress in the axial direction. The gauges are available in three types depending on the Poisson’s ratio of the specimen material.
Temperature compensation materials
- 11: Mild steel
- 17: Stainless steel
- 23: Aluminium
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Applicable specimen | Metal |
| Backing | Polyimide |
| Bonding adhesive | CN, NP-50B, C-1 |
| Element | Cu-Ni |
| Fatigue life at room temperature | 1×10⁶ (±1500×10⁻⁶ strain) |
| Operational temperature(°c) | -20~+200°C |
| Strain limit | - |
| Temperature compensation range(°c) | +10~+100°C |