Utmana oss
  1. Althensensors
  2. Sensorer
  3. Spänningsmätare
  4. Svetsbara töjningsmätare för statisk och dynamisk töjningsmätning
  5. AWM-8 Series Static and Dynamic Quarter Bridge with 3-wire System Strain Gauges

AWM-8 Series Static and Dynamic Quarter Bridge with 3-wire System Strain Gauges

For both static and dynamic measurement

Se tekniska specifikationer

Nyckelfunktioner

  • 1% (10000×10⁻⁶ strain) Strain limit
  • Operational temperature -196~+300°C
  • Stainless steel or Inconel backing
  • Special alloy element
  • Gauge resistance: 120Ω
  • Gauge length: 8mm
  • Type: Quarter bridge, for static and dynamic measurement

About the AWM-8 Series Static and Dynamic Quarter Bridge

The AWM is usable up to 300°C for both static and dynamic strain measurement. The backing material is available in Inconel 600 or SUS304 which should be selected according to the test specimen material.

AW series high temperature weldable strain gauge
These strain gauges have strain sensing elements fully encapsulated in corrosion-resisting metal tubes made of stainless steel or Inconel (except AW-6-350). The strain gauge backings are also made of the same material, and the gauges are installed by spot welding to metal specimens using a dedicated spot welder. The maximum operating temperatue is 800°C for the AWHU. These gauges are suited to measurement in high temperature harsh environments such as underwater or gas-filled atmosphere, or for long term. The AWC-2B and AWCH-2 are available in 1-Gauge 4-Wire configuration.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Begär en offert

  • Snabb respons från en teknisk försäljningsingenjör
  • Skräddarsytt erbjudande
  • Kostnadsfri teknisk rådgivning

AWM-8 Series Static and Dynamic Quarter Bridge with 3-wire System Strain Gauges

 Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Backing Stainless steel or Inconel
Bonding adhesive Spot welding (TML spot welder W-50R is required)
Element Speciale legering
Fatigue life at room temperature 1×10⁶ (±1000×10⁻⁶ strain)
Main object material Metal
Operational temperature(°c) -196~+300°C
Strain limit 1% (10000×10⁻⁶ strain)
Temperature compensation range(°c) RT~+300°C