LFLA Series Strain Gauges for Wood or Gypsum Use
Foil strain gauges for the measurement on materials having low elastic modulus such as wood or gypsum
Nyckelfunktioner
- 3% (30000×10⁻⁶ strain) Strain limit
- Operational temperature: -20~+80°C
- +10~+80°C temperature compensation
- Special plastics backing, Cu-Ni element
- Gauge resistance: 120Ω
- Gauge length: 10mm
- Type: For low elastic modulus materials such as wood or gypsum
About the LFLA Series for Wood or Gypsum Use
LF series low elastic strain gauge
These are foil strain gauges for the measurement on materials having low elastic modulus such as wood or gypsum. These specially designed grid reduces the stiffening effect of the strain gauges to the specimen material. They have a backing made of epoxy resin. These gauges are temperature-compensated for the material having a coefficient of thermal expansion of 11×10-6/°C.
Temperature compensation materials
- 11: Wood, Gypsum
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Applicable specimen | Wood, gypsum |
| Backing | Special plastics |
| Bonding adhesive | CN-E |
| Element | Cu-Ni |
| Fatigue life at room temperature | 1×10⁶ (±1500×10⁻⁶ strain) |
| Operational temperature(°c) | -20~+80°C |
| Strain limit | 3% (30000×10⁻⁶ strain) |
| Temperature compensation range(°c) | +10~+80°C |