CN-R adhesives (Fast hardened type for cold district)
Single component, room-temperature-curing
About the CN-R adhesives
High-speed adhesive (cyanoacrylate) for use in low humidity or low temperature conditions. Under such conditions, the curing time of standard cyanoacrylate adhesives would be considerably prolonged, which may lead to adhesive failures.
Processing: Press the strain gage firmly with the thumb for approx. 30s.
Note:
Due to its extremely fast curing time, the CN-R adhesive is only available from October to April!
Suitable strain gage series
F, PF, QF, ZF, BF, CF, YF, YEF, DD
Suitable materials
- metals
- CFRP
- GFRP
- plastics
Service temperature range of cured adhesive
-30~+120°C
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Applicable specimen | Metal, Plastics, Composite |
| Component | Cyanoacrylate |
| Contents | Single 2 g x 5 |
| Curing temperature and time | Room temperature 10 to 30 sec. (thumb pressure:100 to 300kPa) |
| Operating temperature | -30 to +120℃ |
| Shelf life | 3 months |
| Type | Single component Room-temperature-curing |