CN-Y adhesives (Post-yield)
Single component, room-temperature-curing
About the CN-Y adhesives
The CN-Y is a very easy-to-use adhesive for very large strains up to 20% (one-component cyanoacrylate) with higher viscosity. Compared to the other cyanoacrylate adhesives (instant adhesives), the high elongation properties of the CN-Y are maintained without restrictions even over very long periods. This adhesive should therefore always be used if large strains are to be measured and several weeks lie between the strain gage application and the date of the test performance.
Processing: the strain gage is pressed on firmly with the thumb for approx. 1 minute.
Suitable strain gage series
YF, YEF
Suitable materials
- metals
- CFRP
- GFRP
- plastics
Service temperature range of the cured adhesive
-30~+80°C
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Applicable specimen | Metal, Plastics, Composite |
Component | Cyanoacrylate |
Contents | Single 2 g x 5 |
Curing temperature and time | Room temperature 60 sec. to 2 min. (thumb pressure:100 to 300kPa) |
Operating temperature | -30 to +80 ℃ |
Shelf life | 6 months |
Type | Single component Room-temperature-curing |