WFLA Series Standard Strain Gauges
Single element waterproof strain gages
Nyckelfunktioner
- 3% (30000×10⁻⁶ strain) Strain limit
- Fatigue life 3×10⁴ (±1500×10⁻⁶ strain)
- Operational temperature: 0~+80°C
- +10~+80°C temperature compensation
- Gauge resistance: 120, 350Ω
- Gauge length: 3, 6mm
- Type: Waterproof single element with integrated leadwire, general use
About the WFLA Series Standard Straingauges
Our WF-series water proof type strain gauges eliminate the need for moisture-proofing coating, which is sometimes troublesome in a field test. They have a pre-attached vinyl leadwire and an entire coating with epoxy resin. The coating is transparent and flexible, which ensures easy installation of the gauge. By merely bonding the gauges with CN or P-2 adhesive, outdoor or underwater measurement for a short-term becomes possible. These gauges are also effective in omitting primary coating in case of applying a multilayer coating.
Temperature compensation materials
- 11: Mild steel
- 17: Stainless steel
- 23: Aluminium
Strain gauges with paralleled vinyl leadwire or 3-wire paralleled vinyl leadwire are available:
- Paralleled 1m
- Paralleled 3m
- Paralleled 5m
- 3-wire 3m
- 3-wire 5m
Used leadwire: 0.08mm2 total resistance of leadwire per meter: 0.44Ω
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Applicable specimen | Metal, Glass, Ceramics |
Backing | Epoxy |
Bonding adhesive | CN, P-2 |
Element | Cu-Ni |
Fatigue life at room temperature | 3×10⁴ (±1500×10⁻⁶ strain) |
Operational temperature(°c) | 0~+80°C |
Strain limit | 3% (30000×10⁻⁶ strain) |
Temperature compensation range(°c) | +10~+80°C |