NM1-IP-4L Tilt Measuring System
Single axis tilt measuring system in aluminium enclosure (IP66)
Caractéristiques principales
- Measuring range ±3° up to ±60° or 0 … 90°
- Accuracy ±0,1° (up to ± 15°), 0,5% of measuring range (up to ±60°)
- Analogue output 0 … (±)10 V or 0(4) … 20 mA (4-wire-technology)
- Supply voltage 10 … 18 VDC or 18 … 30 VDC
About the NM1-IP-4L Tilt Measuring System
The single axis industrial tilt measuring system NM1-IP-4L is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt measurement in one axis and intended for side assembly. Available tilt measuring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. The electrical wiring is realized in 4-wire-technology. For further evaluation of the measured inclination there are different standard analogue output signals available, depending on the ordered type.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Accuracy at 23 °c | Up to ±15°: ±0,1°, Up to ±60°: 0,5% of measuring range, Up to ±65°: on request |
Analogue output / burden | 0 - 10 V / ±10 V, max. 1 mA (short-time short-circuit proof) 0 - 20 mA, 4 - 20 mA, max. 500 Ω |
Cross-sensitivity | < 1% up to ±60° |
Dimensions (w x h x d) | 175 x 80 x 57 mm (without EMC cable glands) |
Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
Enclosure | EMC-safe aluminium die-cast enclosure |
Frequency range (-3 db) | 2 Hz |
Number of measuring axis | 1 |
Power consumption | ca. 3 W |
Preferred measuring range | ±3°, ±5°, ±10°, ±15, ± 20, ±30, ±45°, ±60° 0 - 10°, 0 - 30°, 0 - 45°, 0 - 60°, 0 - 90° other measuring ranges on request |
Protection class | P66 |
Supply voltage | 10 - 18 VDC*, 18 - 30 VDC*, electronic is protected against voltage reversal |
Temperature, operating | -20 to +60 °C |
Temperature, storage | -20 to +60 °C |
Voltage insulation between supply voltage and analogue output | Galvanic isolation between supply voltage and analogue output, 200 V, higher voltage insulation on request |
Weight | 1.000 g |
Produits apparentés
Besoin d'autre chose?
NM1-ISU-IP Tilt Measuring System
- Measuring range adjustable up to 360°
- With digital and analog connection
- With RS232-Data Interface