NSZ2-M2-IP Tilt Measuring System
Dual axis tilt switching system with 2 switching contacts per axis and switching delay
Caractéristiques principales
- Measuring range ±3° up to ±10°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 - 30 VDC
- Output: 2 potential-free switching contacts per axis (max. 30VDC/0,5A)
About the NSZ2-M2-IP Tilt Measuring System
The dual axis industrial tilt switching system NSZ2-M2-IP is the combination of two non-contact inclination
sensors and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in X- and
Y-axis and intended for ground assembly. Available tilt measuring & monitoring ranges are ±3° to ±10°. By
using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints
can be adjusted as needed over the whole measuring range for both axis. The relays have potential-free
switching contacts (max. 30 VDC / 0.5 A). The switching delay of the relay is 1 sec at the standard version.
Other switching delays possible on request.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well
suited for applications in rough and industrial environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Cross-sensitivity | < 4% up to ±30° |
| Dimensions (w x h x d) | 160 x 91 x 160 mm (without EMC cable glands) |
| Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0,25 Hz |
| Max. power rating of relay | 30 VDC / 0,5 A |
| Number of measuring axis | 2 |
| Number of relay switching contacts / switching delay | 4 (2 per axis) / 1 sec |
| Power consumption | ca. 5 W |
| Preferred measuring range | ±3°, ±5°, ±10°, other measuring ranges on request |
| Protection class | IP66 |
| Supply voltage | 18 - 30 VDC, electronics protected against voltage reversal |
| Switching accuracy at 23 °c | max. 0,5% of measuring range |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Test signal | 2,5 - 5,5 V, not short-circuit proof |
| Weight | 2.000 g |
Produits apparentés
Besoin d'autre chose?
ASC TSF-360-CAN Digital Fluidic Tilt Sensor
- Measurement Range: 360°
- Accuracy: <0.15°
- Resolution: <0.01°