ASC TS-91V1 / TS-91V5 MEMS Capacitive Tilt Sensor
Uniaxial, analog voltage output sensor with high sensitivity and bias, extremely stable over a wide temperature range
Caractéristiques principales
- Measurement range: ±15°, ±90°
- DC Response
- High Resolution
- Low Temperature Coefficient of Bias
- Excellent Long-Term Bias Stability
- Wide Temperature Range
- High Shock Limit
About the ASC TS-91V1 / TS-91V5 MEMS Capacitive Tilt Sensor
ASC’s tilt sensors TS-9XVY, feature an analog voltage output and are available in two versions, uniaxial and biaxial. Biaxial tilt sensors contain two independent MEMS sensors oriented at 90° to each other to allow perpendicular tilt measurement.
ASC’s tilt sensors feature either a light-weight anodized aluminium housing, which provides case isolation against ground loops or a robust stainless steel housing, which has an IP68 rating. The sensor sensitivity and bias is extremely stable over a wide temperature range from -40°C to +120°C. The sensors can be powered using a 6-36 VDC supply, where the output is independent of the supply.
ASC’s tilt sensors can withstand shocks as 5000g and feature an aluminium housing (78g) or stainless steel housing (192g) with an integral cable. The sensors can be configured with a 4-20 mA current output as an option, by a temperature range from -20 to +70°C.
Additional features ASC TS-91V1 / TS-91V5 Capacitive Tilt Sensor
- Uniaxial / Biaxial
- 4 / 8 Wire System
- Anodised Aluminium Housing
- Stainless Steel Housing
- Protection Class IP67 / IP68
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Acceleration range (g) | ±1 |
| Angular range (°) | ±15 | ±90 |
| Current consumption (per axis) (ma) | 2 |
| Excitation voltage (v dc) | +6 to +36 |
| Non-linearity (%) | 1 |
| Operating temperature (voltage) (°c) | -40 to +120 |
| Recovery time (ms) | 1 |
| Resolution (°) | 0.005 |
| Shock limit (gpk) | Operational: 5000 (0.1 ms; half-sine) |
| Weight (gram, excl. cable) | 78 (aluminium housing) |
Produits apparentés
Besoin d'autre chose?
NM1-2L-420-ATEX Tilt Measuring System
- Measuring range: ±3° to ±60° or 0 to 90°
- Robust EMC-safe aluminium enclosure
- Protected against humidity and vibrations
NM1-IP-2L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP68 aluminium enclosure
- Supply voltage 18 - 28 VDC
NM1-IP-4L Tilt Measuring System
- Measuring range: ±3° up to ±60° or 0 to 90°
- IP66 environmental sealing
- Accuracy ±0,1° (up to ± 15°)