NSZ2-M2-IP Tilt Measuring System
Dual axis tilt switching system with 2 switching contacts per axis and switching delay
Caractéristiques principales
- Measuring range ±3° up to ±10°
- Switching accuracy max. 0,5% of measuring range
- Supply voltage 18 - 30 VDC
- Output: 2 potential-free switching contacts per axis (max. 30VDC/0,5A)
About the NSZ2-M2-IP Tilt Measuring System
The dual axis industrial tilt switching system NSZ2-M2-IP is the combination of two non-contact inclination
sensors and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in X- and
Y-axis and intended for ground assembly. Available tilt measuring & monitoring ranges are ±3° to ±10°. By
using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints
can be adjusted as needed over the whole measuring range for both axis. The relays have potential-free
switching contacts (max. 30 VDC / 0.5 A). The switching delay of the relay is 1 sec at the standard version.
Other switching delays possible on request.
The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well
suited for applications in rough and industrial environments.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Cross-sensitivity | < 4% up to ±30° |
| Dimensions (w x h x d) | 160 x 91 x 160 mm (without EMC cable glands) |
| Electrical connection | M16 x 1,5 EMC cable glands on internal spring-cage terminal blocks |
| Enclosure | EMC-safe aluminium die-cast enclosure |
| Frequency range (-3db) | 0,25 Hz |
| Max. power rating of relay | 30 VDC / 0,5 A |
| Number of measuring axis | 2 |
| Number of relay switching contacts / switching delay | 4 (2 per axis) / 1 sec |
| Power consumption | ca. 5 W |
| Preferred measuring range | ±3°, ±5°, ±10°, other measuring ranges on request |
| Protection class | IP66 |
| Supply voltage | 18 - 30 VDC, electronics protected against voltage reversal |
| Switching accuracy at 23 °c | max. 0,5% of measuring range |
| Temperature, operating | -20 to +60 °C |
| Temperature, storage | -20 to +60 °C |
| Test signal | 2,5 - 5,5 V, not short-circuit proof |
| Weight | 2.000 g |
Produits apparentés
Besoin d'autre chose?
ASC TSF-360-CAN Digital Fluidic Tilt Sensor
- Measurement Range: 360°
- Accuracy: <0.15°
- Resolution: <0.01°