ALF225 Pancake Force Sensor
Ultra low profile axial loadcell for use in force measurements in compression
Caractéristiques principales
- High load ultra low profile loadcell
- Full load range: 50 - 100kN
- Non-lin./hysteresis:0.5/0.5% RL
- Dimensions (mm): Ø100 x 22
About the ALF225 Pancake Force Sensor
The ultra slim design provides for ease of installation beneath heavy machinery mounts, hydraulic rams or interposed within series mechanical compression assemblies.
In the event of structural failure of the loadcell the resulting vertical movement of the supported load including normal deflection will not exceed 2.5mm.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Geometry: Ultra low profile axial loadcell for use in force measurements in compression.
All standard ranges are manufactured in stainless steel.
Notes
1. AL = Applied load. 3. Temperature coefficients apply over the compensated range.
2. RL = Rated load. 4. The load must be applied directly through the central loading axis.
Connections
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red Signal + = Yellow Screen = Orange
Excitation - = Blue Signal - = Green
The screen is not connected to the loadcell body.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Bridge resistance | 350Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 10V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.5% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Compression |
| Measurement range | 50kN - 100kN |
| Non-linearity - terminal | ±0.5% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 300% RL |
| Rated output - nominal | 2.3mV/V |
| Rated output - rationalised | 2.0mV/V |
| Rationalisation tolerance | ±0.5% RL |
| Repeatability | ±0.02% RL |
| Sealing - r option | IP65 |
| Sealing - s option | IP67 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.005% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Weight - nominal (excluding cable) | 0.8kg |
| Zero load output | ±4% RL |
Produits apparentés
Besoin d'autre chose?
ALF252 Pancake Force Sensor
- Measuring range: ~1 kN to ~10 kN
- Non-lin./hysteresis: 0.1/0.1% RL
- Various designs possible on request
ALF254 Pancake Force Sensor
- Measuring range: ~25 kN to ~200 kN
- Shear web structure
- High vertical & lateral mechanical stiffness
ALF302 Pancake Force Sensor
- Measuring range: ~5 kN to ~50 kN
- Low profile axial loadcell
- Dimensions (mm): Ø38 x 16