CP22E Single-turn Potentiometer
1-Turn Potentiometer, Plastic Housing, Wirewound (Bushingmount)
Caractéristiques principales
- Wirewound
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.25
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22E Single-turn Potentiometer- Wirewound (Bushingmount)
The CP22E is a low-cost potentiometer with plastic housing and an internationally patented snapping-in construction and side lug terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 6mm dia. and 20mm length), multi-ganged (available up to 10 gangs), with stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) bushing with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 355º ±5º |
Independent linearity tolerance | Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kΩ) |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 20g |
Max. practical resistance value | 20kΩ |
Mechanical travel | 360º (Endless) |
Noise | Within 100Ω E.N.R. |
Power rating | 0.5W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft diameter (mm) | 6 |
Standard resistance range | 50Ω to 10kΩ |
Starting torque | Within 5mN·m (50gf·cm) |
Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |
Produits apparentés
Besoin d'autre chose?
CP22 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 22.23 x 15 mm
- Resistance range 50 Ω to 10 kΩ
CP30 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 27 x 15 mm
- Resistance range 50 Ω to 20 kΩ
CP45 Single-turn Potentiometer
- Servomount type with ball bearings
- Dimensions (D x L) 41 x 18 mm
- Independent linearity ±0.5% to ±0.1%