1. Althensensors
  2. Capteurs
  3. Capteurs de position rotatif
  4. Capteurs de Position Rotatif
  5. CP30 Single-turn Potentiometer

CP30 Single-turn Potentiometer

1-turn Potentiometer Wirewound (Servomount)


Caractéristiques principales

  • Wirewound
  • Dimensions D x L (mm): 27x15
  • Standard Resistance Range 50 Ω to 20 kΩ
  • Independent Linearity (± %): 0.5 to 0.15
  • Mechanical travel: 360°
  • Electrical travel: 355° ±5°

About the CP30 Single-turn Potentiometer- Wirewound (Servomount)

The CP30 is a servomount type potentiometer with ball bearings and a 27mm outer diameter and turret side terminals.

Special Specifications Available

Lower resistance values (10Ω, 20Ω), extra taps (available up to 3 taps), multiganged (available up to 5 gangs. Housing length is extended by 8.5mm per gang), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), with stopper (rotating angle becomes 330º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.

Avez-vous besoin de ce capteur pour votre prochain projet?

Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.

Parler à un expert

Téléchargements de produits

Faites-le à votre façon

Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.

Parler à un expert

Spécifications techniques

Spécifications Valeur
Dielectric strength 1 minute at 1,000 V.A.C.
Electrical travel 355º ±5º
Independent linearity tolerance Standard Class ±0.5%, Precision Class ±0.15% (±0.2% in case of within 5kΩ)
Insulation resistance Over 1,000MΩ at 1,000 V.D.C
Mass Approx. 30g
Max. practical resistance value 50kΩ
Mechanical travel 360º (Endless)
Noise Within 100Ω E.N.R.
Power rating 0.75W
Resist. temp. coefficient of wire ±20p.p.m./ºC
Shaft diameter (mm) 3
Standard resistance range 50Ω to 20kΩ
Starting torque Within 2mN·m (20gf·cm)
Total resistance tolerance Standard Class ±3%(H), Precision Class ±1%(F)

Produits apparentés

Besoin d'autre chose?

CP45 Single-turn Potentiometer

  • Servomount type with ball bearings
  • Dimensions (D x L) 41 x 18 mm
  • Independent linearity ±0.5% to ±0.1%
Datasheet Voir le produit

CP50 Single-turn Potentiometer

  • Wirewound type with ball bearings
  • Dimensions (D x L) 50.8x18 mm
  • Resistance range 50 Ω to 20 kΩ
Datasheet Voir le produit

12HP Multi-turn Potentiometer

  • Standard resistance range: 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn)
  • Max. practical resistance value: 70kΩ (5turn), 150kΩ (10turn)
  • Total resistance tolerance: Standard Class ±3%(H), Precision Class ±1%(F)
Datasheet Voir le produit