FCP22AC Single-turn Potentiometer
Conductive plastic - Bushingmount
Caractéristiques principales
- Conductive plastic (Busingmount)
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 1.5 to 1.0
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 320° ±5°
About the FCP22AC Single-turn Potentiometer
Our 1-Turn Potentiometers are fully continuous rotation potentiometers without stoppers and are highly reliable in offering excellent quality as a prolonged rotating life.
Special Specifications Available
Extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) bushing with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis sans engagement ou envoyez-nous vos coordonnées pour une consultation gratuite et sans engagement. Nos ingénieurs commerciaux vous contacteront dans un délai maximum de 1 à 2 jours ouvrables.
Téléchargements de produits
Parlez à nos experts
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 500 V.A.C. |
Electrical travel | 320º ±5 |
Independent linearity tolerance | Standard Class ±1.5%, Precision Class ±1.0% |
Insulation resistance | Over 1,000MΩ at 500 V.D.C |
Mass | Approx. 30g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 1.0W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Special practical resistance values | 500, 20k, 50k, 100k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10 k (Ω) |
Starting torque | Within 5mN·m (50gf·cm) |
Total resistance tolerance | Standard Class ±15% (L), Precision Class ±10% (K) |
Produits apparentés
Besoin d'autre chose?

FCPS22AC Single-turn Potentiometer
- Essentially infinite resolution
- Low-cost servomount type potentiometer
- With oil-less metal bearing

FCP22E Single-turn Potentiometer
- Low-cost potentiometer with plastic housing
- Dimensions (D x L) 22x12 mm
- Resistance range 1 Ω to 10 kΩ

FCP22R Single-turn Potentiometer
- Low-cost potentiometer
- Essentially infinite resolution
- Independent Linearity ±1.5% to ±1.0%