FCP50A Single-turn Potentiometer
1-turn Potentiometer | Conductive plastic (Servomount)
Caractéristiques principales
- Conductive plastic
- Dimensions D x L (mm): 50.8 x 18
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.05
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 350° ±5°
About the FCP50A Single-turn Potentiometer- Conductive plastic (Servomount)
The FCP50A is a servomount type potentiometer with ball bearings, a 51mm outer diameter and turret side terminals.
Special Specifications Available
Extra taps (available up to 3 taps), multi-ganged (available up to 7 gangs, housing length is extended by 12mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 350º ±5º |
Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.2%, Super precision Class ±0.05% |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 80g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 3.0W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Shaft diameter (mm) | 6 |
Special practical resistance values | 500, 20k, 50k, 100k, 200k, 500k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10 k (Ω) |
Starting torque | Within 4mN·m (40gf·cm) |
Total resistance tolerance | Standard Class ±10% (K) |
Produits apparentés
Besoin d'autre chose?
CP22C Single-turn Potentiometer
- Low-cost potentiometer with metal housing
- Independent linearity ±0.5% to ±0.25%
- Resistance range 50 Ω to 10 kΩ
CP22E Single-turn Potentiometer
- Low-cost potentiometer with plastic housing
- Resistance range 50 Ω to 10 kΩ
- Independent linearity ±0.5% to ±0.25%
CP22 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 22.23 x 15 mm
- Resistance range 50 Ω to 10 kΩ