APR3110 Standard Pressure Transducer
Hazardous area pressure transmitter
Caractéristiques principales
- ATEX and IECEx certified
- Designed for operation in zone 0, zone 20 and M1 mining
- Wide choice of low pressure ranges from 0-100 mbar
- Available in Absolute and Gauge reference
- Ideal for low pressure fluid and gas applications
- DNV GL certification available
About the APR3110 Pressure Transmitter
The APR3110 pressure transmitter is designed to meet the requirements of the majority of hazardous applications where accurate low pressure measurement is required. Robustly constructed from stainless steel this range of pressure transmitters incorporates the latest silicon strain gauge technology together with a custom IC amplifier offering excellent stability and accuracy over a long service life. Electrical connection is via a detachable DIN connector allowing easy access to zero and span adjustment. Standard pressure connection is 1/2” BSP, but other options are available. Pressure ranges are available from 0- 100 mbar to 0- 900 mbar. Suitable for use with low pressure fluid and gas applications.
The APR3110 is intended for installation and operation in zone 0, gas group IIC, temperature class T4 and zone 20 dust and M1 mining. ATEX and IECEx approval and protection is by intrinsic safety when used with a safety or isolation barrier. DNV GL rules for classification of ships, high speed & light craft and DNV GL offshore standards.
Key Features
- ATEX and IECEx certified
- Designed for operation in zone 0, zone 20 and M1 mining
- Wide choice of low pressure ranges from 0-100 mbar
- Available in Absolute and Gauge reference
- Ideal for low pressure fluid and gas applications
- DNV GL certification available
Avez-vous besoin de ce capteur pour votre prochain projet?
Demandez un devis dès aujourd'hui ou laissez vos coordonnées pour recevoir plus d'informations de la part de l'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des capteurs et des systèmes de mesure standard, mais nous pouvons également vous aider à concevoir un capteur sur mesure ou une solution de mesure complète. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| Accuracy nlhr | ≤ ±0.3 % of span BFSL |
| Atex/icex approval option (4-20ma version only) | Ex II 1 G Ex ia IIC T4 Ga (zone 0) Ex II 1 D Ex ia IIIC T135 °C Da (zone 20) Ex I M 1 Ex ia I Ma (group 1 M1) |
| Atex/iecex safety values | Ui = 28 V Ii = 119 mA Pi = 0.65W Li = 0.1 μH Ci = 74 nF Temperature Range = -20 °C to +70 °C Max. cable length = 45 m |
| Insulation resistance | > 100 MΩ @ 50 VDC |
| Load driving capability: | 4 - 20 mA: RL < [UB - 13 V] / 20 mA (e.g. with supply voltage (UB) of 36V, max. load (RL) is 1150Ω) |
| Operating ambient temperature | 20 °C to +85 °C (-4 °F to +185 °F) |
| Operating media temperature | -20 °C to +85 °C (-4 °F to +185 °F) |
| Output signal | 4 - 20 mA (2 wire) |
| Overpressure safety: | 6x for 100 mbar range; 3x for ranges 200 mbar to 900 mbar |
| Pressure reference | Gauge or Absolute ranges from 500mbar |
| Protection of supply voltage | Protected against supply voltage reversal up to 50 V |
| Sensor technology | Isolated Piezoresistive Silicon |
| Standard pressure ranges (bar) | 0-100 mbar, 0-200 mbar, 0 -250 mbar; 0-300 mbar; 0- 400 mbar, 0-500 mbar, 0-600 mbar, 0-750 mbar, 0-900 mbar (other ranges available) |
| Standard pressure ranges (psi) | 0-1.5 psi; 0-3 psi; 0-4 psi: 0-7.5 psi; 0-15 psi (other ranges available) |
| Storage temperature | +5 °C to +40 °C (+41 °F to +104°F) Recommended Best Practice |
| Supply voltage | 13 - 36 VDC |