FDRF096-50/70-200-Clb Diameter Measurement System
Intended for non-contact scanning and inner surface geometry measurement of wheel center bore
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Depth of measurement | 200mm |
| Enclosure rating | IP67 |
| Housing material | Aluminum |
| Light source | Red semiconductor laser, 600nm wavelength |
| Measurement accuracy | ±5 µm |
| Measurement cycle, no more, s | 20 |
| Measurement range | 50mm to 70mm |
| Operation temperature | -10°С to 60°C (-30°С to 60°С for the sensors with in-built heater) |
| Output power | <1 mW |
| Permissible ambient light | 30000lx |
| Power consumption | 3W (standby mode), 20W (scan mode) |
| Power supply | 9V - 24V |
| Relative humidity | 5-95% (no condensation) |
| Shock | 30g / 6ms |
| Space resolution | 3200 points/turnover |
| Storage temperature | -20°С to 70°С |
| Vibration | 20g/10 - 1000Hz, 6 hours, for each of XYZ axes |
| Weight (without cable) | 4000gram/2000gram |