ePressure V2.1 Pressure Sensor
Pressure sensors of the ePressure series are especially optimized to perform dynamic measurements.
Key features
- Optimisation for dynamic measurements
- Compact design
- Frequency resolution of up to 1 kHz
About the ePressure V2.1 Pressure Sensor
Pressure sensors of the ePressure series are especially optimized to perform dynamic measurements. Due
to the low dead volume inside the housing frequency resolutions of up to 1 kHz are possible. Thanks to the
compact design the sensors can be placed close to the measurement location, thus reducing spectral
damping caused by long tube lines.
ePressure pressure sensors of the version 2.1 have a wide range input of 8 to 30 VDC. For best measurement
results high frequency interferences in the power supply should be avoided.
The pressure transducers feature a differential pressure input. They are available in uni- and bidirectional
design.
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Pressure range / Unidirectional | 0 to 250 Pa | 1.25kPa | 2.5kPa | 5kPa | 7.5kPa |
| Safe pressure range | 25 kPa |
| Burst pressure | 50 kPa |
| Nonlinear & hysteresis | 0.25% max |
| Signal delay | 0.5 ms |
| Unidirectional | 0.25…4.25 V |
| Bidirectional | 2.25 ± 2 V |
| Temperature | 5° C…50° C compensated / -25°C … 85°C |
| Dimensions | Length 47 mm casing, 65 mm overall Width 24 mm height 13 mm |