About the Vibromatrix® InnoAnalyzer® Speed Software
The InnoAnalyzer Speed masters order-tracked filtering and band-pass filtering. Thus it can display magnitude and phase of (pre-filtered) orders but also wide-band overall values in dependance on the rotational speed.
Speed range and frequency resolution can be adjusted. Using these parameters, the InnoAnalyzer Speed calculates optimum settings for the speed change rate, which you can enter for instance into a frequency converter.
Magnitude and phase of arbitrary orders can be displayed at their actual frequency or they can be displayed frequency-transformed and stacked in relation to order 1.
The clone function makes it possible to operate several InnoAnalyzers Speed at the same time.
The export of the measurement graph as graphic or pairs of numbers in text format into other applications provides additional fields of application.
Applications InnoAnalyzer® Speed
Rotating parts in drives, gears, pumps, fans and many other technical products cause perturbing vibrations. Different rotation speeds cause different vibrations since the measurement objects develop or do not develop resonant behaviour at certain rotation speeds.
These differences become obviously in run-up or coast-down measurements. A rotor changes its rotation speed when run up or coast down and excites the whole system at different frequencies.
The InnoAnalyzers Speed measure the vibration level and phase angle at the rotation speed or a multiple and graphically display them at the respective rotation speed. This way, for instance resonant rotation speed levels are detected. The progression of the rotation speed is displayed graphically as well.
For rotation speed detection, different photoelectric reflex switches and contrast scanners are directly supplied by the InnoBeamer and their signal is read. Optionally, an existing rotation speed signal can be fed as pulse/revolution or reference can be taken towards a transformed rotation speed.
Requirements for using InnoAnalyzer® Speed
- Microsoft Windows operating system
- Windows XP or newer (32-bit and 64-bit)
- VibroMatrix measurement system (measurement amplifier InnoBeamer required)