PTS 420 Series LVDT Positiesensor
Ideale keuze voor procesbesturingstoepassingen
Belangrijkste kenmerken
- LVDT transmitter
- Low Cost
- Compatible with Process Controllers
- Ideal for Noisy Environments
- Calibration Certificate Supplied with all models
About the PTS 420 Series - Position Transmitter
The PTS 420 linear position transmitter consists of a one-piece linear position sensor and transmitter electronics. Configured for use in two-wire, current loops, the PTS 420 is compatible with most process controllers. Units are available in measurement ranges from 0.25" to 10". Rugged packaging and a large barrier type terminal strip facilitates installation and screwdriver adjustments provide for ease of calibration. Designed with a rain-tight, splash-proof housing, the PTS 420 is suitable for position measurements requiring stem-type valves such as the ones frequently used in process control, power generation, and other related applications. The PTS 420 can also be used for valve position indication, roll gap control in rolling mills, and applications where long cables are required.
Applications for PTS Series
- Process Control
- Air-Handling Systems
- Power Generation
- Filtration/Water Treatment
- Steel, Aluminum, Paper, Rubber,
- and Plastic Rolling Mills
Valve Position Sensing
A PTS 420 is a two-wire current-loop position transmitter especially suited to valve position indication and other position indication in process industries.
Roll Gap Measurement
A typical application of the PTS 420 position transmitter is the measurement of the roll gap in rolling mills for steel, aluminum, and other primary metals. The same transmitter is adaptable to measuring the position of calendering rolls in paper mills, rubber plants, and plastic sheet and film manufacturing facilities.
Sluice Gate Control
The PTS 420 position transmitter can be used to measure the open height of sluice gates in sewage and waste water treatment plants. Other applications include power plant water supplies, potable water filtration plants, flood control dams, and industrial processes.
Heeft u deze sensor nodig voor uw volgende project?
Vraag vandaag nog een offerte aan of laat uw gegevens achter voor meer informatie van een van onze experts.
Product downloaden
Doe het op uw manier
Niet precies wat u zoekt? Wij bieden standaard sensoren, maar kunnen u ook helpen met voor u aangepaste sensoren of een volledig op maat gemaakte meetoplossing. Neem contact met ons op voor advies of prijzen.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Controls | Zero and span potentiometers, 10 turn |
| Frequency response | 50Hz @ -3db |
| Housing material | Aluminum alloy |
| Ip rating | IP65 |
| Measurement range | 5.35 to 254mm |
| Non-linearity | ±1.25% to ±0.5% FR |
| Operating temperature range | -25°C to +85°C |
| Output | 4-20mA |
| Stability | 0.05% of FSO, after 30 minute warm up |
Gerelateerde producten
Heeft u iets anders nodig?
SI-Series LVDT Positiesensor
- Standaard meetbereiken van 1 tot 20 inch
- 4 tot 20 mA ingang/uitgang
- Niet-lineariteit van ± 0,25% van FRO of beter
SQ-Series LVDT Positiesensor
- Robuuste, zware constructie
- Bereiken van ±0,50 inch tot ±10,00 inch
- Niet-lineariteit minder dan ± 0,25% van FRO
SSB-Series LVDT Positiesensor
- Betrouwbaarheid op lange termijn (20+ jaar)
- Inconel constructie standaard
- Hogedruktoepassingen (tot 5.000 psi)