PTS 420 Series LVDT Position Sensor
Ideal choice for process control applications
Nyckelfunktioner
- LVDT transmitter
- Low Cost
- Compatible with Process Controllers
- Ideal for Noisy Environments
- Calibration Certificate Supplied with all models
About the PTS 420 Series - Position Transmitter
The PTS 420 linear position transmitter consists of a one-piece linear position sensor and transmitter electronics. Configured for use in two-wire, current loops, the PTS 420 is compatible with most process controllers. Units are available in measurement ranges from 0.25" to 10". Rugged packaging and a large barrier type terminal strip facilitates installation and screwdriver adjustments provide for ease of calibration. Designed with a rain-tight, splash-proof housing, the PTS 420 is suitable for position measurements requiring stem-type valves such as the ones frequently used in process control, power generation, and other related applications. The PTS 420 can also be used for valve position indication, roll gap control in rolling mills, and applications where long cables are required.
Applications for PTS Series
- Process Control
- Air-Handling Systems
- Power Generation
- Filtration/Water Treatment
- Steel, Aluminum, Paper, Rubber,
- and Plastic Rolling Mills
Valve Position Sensing
A PTS 420 is a two-wire current-loop position transmitter especially suited to valve position indication and other position indication in process industries.
Roll Gap Measurement
A typical application of the PTS 420 position transmitter is the measurement of the roll gap in rolling mills for steel, aluminum, and other primary metals. The same transmitter is adaptable to measuring the position of calendering rolls in paper mills, rubber plants, and plastic sheet and film manufacturing facilities.
Sluice Gate Control
The PTS 420 position transmitter can be used to measure the open height of sluice gates in sewage and waste water treatment plants. Other applications include power plant water supplies, potable water filtration plants, flood control dams, and industrial processes.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Controls | Zero and span potentiometers, 10 turn |
| Frequency response | 50Hz @ -3db |
| Housing material | Aluminum alloy |
| Ip rating | IP65 |
| Measurement range | 5.35 to 254mm |
| Non-linearity | ±1.25% to ±0.5% FR |
| Operating temperature range | -25°C to +85°C |
| Output | 4-20mA |
| Stability | 0.05% of FSO, after 30 minute warm up |
Relaterade produkter
Behöver du något annat?
SI-Series LVDT Position Sensor
- Standard measurement ranges of 1 to 20 inches
- 4 to 20 mA input/output
- Non-linearity of ±0.25% of FRO or better
SQ-Series LVDT Position Sensor
- Rugged, heavy duty construction
- Ranges of ±0.50 inches to ±10.00 inches
- Non-linearity less than ±0.25% of FRO
SSB-Series LVDT Position Sensor
- Long term reliability (20+ years)
- Inconel construction standard
- High pressure applications (to 5,000 psi)