ASC 66C1 Piezoresistive Accelerometer

---

About the ASC 66C1 Piezoresistive Accelerometer

The accelerometers are based on an advanced piezoresistive MEMS technology and can be used in a low frequency response up from 0Hz. The piezoresistive sensor element is made of monolithic resistors. These resistors are attached to carrier-elements and are electrically connected in a Wheatstone bridge. The electrical signal changes proportional to the vibration.

The model ASC 66C1 is a uniaxial accelerometer based on piezoresistive technology. The ASC 66C1 is a small and compact accelerometer. The housing is a flat design made of hard anodised aluminium. Due to low mass, the model is ideal for testing on light-weight structures.

The sensing element has integrated overload stops and therefore the silicon chip is highly shock resistant. The ASC 66C1 has an excellent non-linearity over a wide frequency response. Electrically the units features a Wheatstone bridge configuration.

The model ASC 66C1 can be obtained with all common sensor ID modules. A very high flexible and rugged cable provides a simple mounting. The model ASC 66C1 is factory calibrated and is equipped with 6 meter cable as a standard.

Key features ASC 66C1

• Uniaxial
• Wheatstone Bridge
• mV Output
• Aluminium Housing
• Made in Germany
• Range: 500g, 1000g and 2000g
• Small Size
• Light Weight
• DC Response
• ±5000g Shock Resistance
• Gas Damped
  
  

Options ASC 66C1

• Customised Cable Length
• Customised Connector
• TEDS Module
• Equipment Exchange (EQX)
  
  

Applications ASC 66C1

• Automotive Crash Testing
• Shock Testing

---