18FLPB Series Linear Potentiometer

Conductive Plastic Model, shaft with a cardan joint and fixing nail mounting to the body

About the 18FLPB Series Linear Potentiometer

The 18FLPB has a connector block on the housing case and a shaft with a cardan joint.

Features 18FLPB

  • Heavy duty wirewound model
  • Measurement range: 50mm
  • Resistance value: 50 to 100kO
  • Linearity tolerance: ±0.1% to ±0.5%
  • Water-proof type
  • 5 Poles

The 18FLPB Series are available in stroke ranges varying from 25mm to 150mm.
For specfied information about a certain type, please contact us.

Special Specifications available

Stroke 200mm, sealed type (IP54, the length of "A" is extended by abt. 6 mm), extra tap, with leadwire terminals

Specifications

Standard resistance values
500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ
Total resistance tolerance
±10%
Independent linearity toerance
Standard class: ±0.5%
Precision class: ±0.2%, ±0.1%, ±0.05%
Resolution
Essentially infinite
Output smoothness
Within 0.1% against input voltage
Contact resistance variation
Within 2% C.R.V.
Power rating
0.5W, 0.75W, 1.0W, 1.25W, 1.5W
Stroke
25mm, 50mm ,75mm, 100mm, 150mm
Insulation resistance
Over 1.000MΩ at 500VDC
Dielectric strength
1 minute at 500V.A.C.
Friction
Within 1.2N (120gf)
Stopper strength
Approx. 90N (9kgf)
Resistance temperature coefficient
±400p.p.m./°C
Mass
Approx. 90g, approx. 120g, approx. 140g, approx. 160g, approx. 250g
  • Follow us: