XPM4 Miniature Pressure Transducer

Miniature threaded pressure transducer

About the XPM4 Miniature Pressure Transducer

The XPM4 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The all-titanium construction and flush diaphragm protect the sensor against most corrosive environments.

The XPM4 incorporates cutting-edge SanShiftTM technology, which virtually eliminates zero shifts caused by installation torque. The XPM4’s sensing element is a fully temperature compensated Wheatstone bridge configuration made with high stability micro-machined silicon strain gauges which optimize performance, especially at low ranges and high frequencies. All models come with a cable output strengthened by a strain relief spring or with an electrical connector (optional).

Key features XPM4

  • Measurement ranges 0 … 5 bar to 0 … 200 bar (absolute and gauge)
  • Non-linearity 0.35 %
  • Output 10 mV/V (3 mV/V for 5 bars and 6 mV/V for 10 bars)
  • Supply voltage 10 VDC
  • Flush diaphragm
  • All-titanium construction
  • Low installation torque sensitivity
  • M4 x 0.7 thread
  • For static and dynamic applications
  • Cable or connector output

Applications XPM4

  • Aerospace
  • Explosion test benches
  • Oven monitoring equipments
  • Robotics and effectors
  • Laboratory and research

Specifications

Measurement Range
0 - 5 bar to 0 - 200 bar (0 - 75 to 0 - 3000 psi)
Accuracy
0.35% to 0.5%
Output
3 to 10 mV/V [10 VDC], depending on range
Pressure Type
gauge, absolute, sealed
Overpressure
2X FS
Operating Temperature
-40 to 120 °C [ -40 to 248 °F ]
Dimensions
Hex 8 mm [ Hex .315 in ]
Port Material
Titanium
Pressure Port/Fitting
M4x0.7 Male
Options
Cable Length, Compensation Temperature Range, Connector Output, IP67 Protection, Non-standard Power Supply Calibration
  • Follow us: