20HP Multi-turn Potentiometer
Multi-turn Wirewound Bushingmount type
Key features
- Wirewound
- Dimensions (mm) DxL: 20×18 / 20×25.5
- Resistance range (ohm): 100Ω -50kΩ / 100Ω -100kΩ
- Linearity (±%): 0.3 to 0.2 /0.2 to 0.1
- Mechanical travel (+10° 0°): 1,800 / 3600
- Electrical travel (±5°): 1,800 / 3600
About the 20HP Multi-turn Potentiometer
The 20HP is a precision multi-turn potentiometer with an outer diameter of 20mm. Servomount type and with limit-switch is also available.
Features Multi-turn potentiometer 20HP-5S
- Wirewound
- Dimensions (mm) DxL: 20×18
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 20HP-10S
- Wirewound
- Dimensions (mm) DxL: 20×25.5
- Standard resistance range (ohm): 100Ω -100kΩ
- Independent linearity (±%): 0.2 to 0.1
- Mechanical travel (+10° 0°): 3600
- Electrical travel (±5°): 3600
Special Specifications Available
3turn type (S20HP3S), lower resistance values (10Ω, 20Ω, 50Ω), extra taps (available up to 1 tap), multiganged (available up to 2 gangs), shaft with front and rear extension (rear shaft with 2mm dia. and 10mm length), shaft dia. (ø6.35mm) · bushing with inch dimensions, special machining on the shaft, simple sealed housing (expect servomount type), slippingclutch incorporated type (S20HP10S1782, 20mN·m~60mN·m), with a limitswitch adaptor, with pin terminals for p.c. board (20HP-5P, 20HP-10P).
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard sensors but can also help you with a tailor-made sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
Specification | Value |
---|---|
(within 5kΩ): (±0.25%) (±0.15%) | |
Precision Class: ±0.2% ±0.1% | |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 360º Xn ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.2% |
Insulation resistance | Over 100 MΩ at 1,0000 V.D.C. |
Mass | Approx. 25g (5-turn), Approx. 30g (10-turn) |
Max. practical resistance value | 100kΩ (5turn), 150kΩ (10turn) |
Max. working voltage | 900V |
Mechanical travel | 360º Xn + 1 0 (n: No. of turns) |
Noise | Within 100O E.N.R. |
Power rating | 1.0W (5-turn) 2.0W (10-turn) |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft dia. (mm) | 6 |
Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
Starting torque | Within 5mN·m (50gf·cm) (Bushingmount type), Within 3mN·m (30gf·cm) (Servomount type) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) (Bushingmount type), Approx. 0.6N·m (6kgf·cm) (Servomount type) |
Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |
Related products
Need something else?
20HPS Multi-turn Potentiometer
- Measuring range 3, 5 or 10
- Resistance range 20 Ω to 100 kΩ
- 20 mm outer diameter
22HP Multi-turn Potentiometer
- Measuring range 1 to 8 turns
- Standard dimensions 22×19 mm
- Lowest-cost multi-turn potentiometer
25HP Multi-turn Potentiometer
- Measuring range 3, 5, 10, 15 or 20 turns
- Standard resistance range 100Ω -100kΩ
- Independent linearity ±0.3% to ±0.1%