K-1 Special rubber based solvent thinned
Air-drying, a half day in room temperature
About the K-1
Moisture-proofing coating from cryogenic to room temperature for laboratory requirements. Does not provide a high degree of mechanical protection.
A layer of K-1 is applied directly from the tube or with a brush over the area to be coated. Curing time is about half a day in room temperature, but it depends on conditions such as the specimen material, temperature, and so on. If the coating layer is too thin, apply another layer to make an adequate thickness.
- Specifications
- Datasheets
Specifications
Materials
Special rubber based solvent thinned
Color
White
Contents
25g
Operating Temperature
‒269~+60°C
Curing conditions
Air-drying / A half day in room temperature
Datasheets
Downloads
Share this page by: