PTC Single Point Load Cell
For platforms 400 x 400mm
Key features
- Range: 30 to 150kg
- Stainless steel AISI 420 construction
- Combined error < +/- 0.02%
- Protection class IP67
General information
The PTC platform load cell is suitable for series use in weighing and batching systems, level measurement equipment and general force measurement systems where accurate measurements are required at low cost.
Features
- Measuring range: 30 - 150kg
- Stainless steel construction AISI 420
- Combined error: < ±0.02%.
- Supply voltage: 15V
- Protection class: IP67
Do you need this sensor for your next project?
Request a no-obligation quote or send us your contact details for a free, no-obligation consultation. Our sales engineers will then contact you within a maximum of 1 to 2 working days.
Product downloads
Talk to our experts
Not exactly what you are looking for? We offer standard sensors, but can also help you with sensors adapted for you or a fully customised measurement solution. Contact us for advice or pricing.
Talk to an expertTechnical Specifications
Specification | Value |
---|---|
Combined error | ≤±0.02% |
Compensated temperature range | -10 °C / +40 °C |
Creep at nominal load in 30 minutes | 0.02% |
Deflection at nominal load | 0.3 mm |
Input resistance | 385 Ω ±30 |
Insulation resistance | >5000 MΩ |
Material | AISI 420 stainless steel |
Max supply voltage without damage | 15 V |
Nominal load (eₘₐₓ) | 30 - 50 - 75 - 100 - 150 kg |
Operating temperature range | -20 °C / +60 °C |
Output resistance | 350 Ω ±5 |
Protection class | IP67 |
Rated output | 2 mV/V ±10% |
Safe overload (% of full scale) | 150% |
Temperature effect on span | 0.002% °C |
Temperature effect on zero | 0.002% °C |
Ultimate overload (% of full scale) | 300% |
Zero balance | ±1% |