IOLITE Accessories

---

About IOLITE Accessories

Accessories for powering the IOLITE devices and building a large-scale measurement.

1. IOLITE-POWER-INJECTOR

IOLITE-Power-Injector is a passive PoE power injector. It merges a 12-48 V DC power source and the EtherCAT communication into a single CAT6 cable. The IOLITE devices require the POWER-INJECTOR as the first device in the chain. It also offers the first line of protec-tion to the EtherCAT chain:

• Burst protection according to 61000-4-4
• Surge protection according to 61000-4-5
  
  

 

2. IOLITE-REPEATER

IOLITE-Repeater is an EtherCAT repeater node. It is used to increase the cable length between two IOLITE measurement devices for a lower cost than adding an additional measure-ment device. The REPEATER fits perfectly into the EtherCAT chain, daisychaining the signal and power from the previous to the next device.

3. IOLITEDW WATERPROOF ENCLOSURE

IOLITE devices can be supplied in a wateproof aluminium enclosure with cable glands. The enclosure is designed to be mounted outdoor. Cables are to be inserted through the cable glands at the installation location and crimped to the cable connectors inside the enclosure. The top lid is to be fixed to the enclosure using an O-ring seal and four bolts after the connectors are mated.

The outdoor enclosure automatically vents air to equalize pressure inside the enclosure to the outside air pressure while it does not allow water to pass into the enclosure. This prolongs the life span of the seal and increases durabi-lity of the enclosure.

---