1. Althensensors
  2. Mätningssystem
  3. Mätningssystem för järnvägar
  4. Vägningssystem för tåg och spårvagnar
  5. Weighing in Motion (AWIM)

Weighing in Motion (AWIM)

An advanced stationary measurement system for Weighing in Motion, Wheel Flat Detection and Train Detection


About the Weighing in Motion System

Our AWIM Weighing in Motion System is a stationary measurement system able to function as a dynamic weighing scale. This advanced in-motion system is used for Weighing in Motion, Wheel Flat Detection, Train Detection and much more!

It consists of various passive non-moving parts that are mounted on the side of the railbeam.
These sensors are then connected into a network and special electronics combine all signals using specific algorithms. Various parameters are calculated and logged together with unique vehicle identification features.

The AWIM system offers the following measurements and safety parameters:

  • Train direction and speed
  • Identifiation number, Locomotive- & Wagontype
  • Very high accurate load measurements (< ±0,5%)
  • Weight of single wheel, axles, bogies and complete wagons
  • Number of axles
  • Very high accurate uneven load detection
  • Overload detection
  • Wheel Flat Detection (defects)
  • Detection system for Derailment Risk (!)

Accurate at high speeds

The accuracy of this system is based on measuring a complete train, consisting of a locomotive and various cars. Our AWIM System is equipped with eight weighing points. Formal tests by the Technical Research Institute of Sweden show even an average accuracy of ±0,2%. The internationally recognised Netherlands Measurement Intitute (NMi) has certified the system as OIML Class 0.5.

When combining all measurements an overall accuracy of better than ±0,5%* is achieved for passing trains with various speeds, complying with OIML R106, class 0,5.

WIM system

Integrated Vision-RFiD scanning system

In order to identify the vehicle, the locomotive- and wagontype can be determined by our system thanks to an integrated algorithm comparing distances between passing wheels and bogies. In addition extra features can be added to increase identification of vehicles and axles. We offer an integrated RFiD scanning system and as well Vision Technology Cameras to register the vehicle number and axle ID’s.

Furthermore our AWIM system can easily be combined with our laser 3D Automated Wheel Measurement System. To include diameter, back2back and the complete wheel profile of all wheels!

Logging & Monitoring

The system-cabinet installed just next to the track houses all electronics and processing units. All sensors are connected to this system and signals are being processed in real-time. The raw measurements are processed, analyzed and converted into ready-to-go data and results. These can be monitored and logged remotely, fast, save & easy!

Extra unique features

  • In-built redundancy
  • Easy to maintain & Simple spare-parts
  • Best price / performance ratio
  • No speed & weight limitation
  • No change in infrastructure
  • Simple installation, no foundation needed
  • No moving parts
  • Fits on all rail standards
  • Remotely operated, including maintenance & upgrades
  • Complying to standards OIML R106, ISO9001 and ISO14001
  • Protection degree: IP68

* The Weighing in Motion system is very accurate and remains accurate at high speeds. But at the same time we need to take into consideration that a train at high speeds will ‘woble’ alot more and increase the impact on the sensor causing more weight and thus increasing the weighing error.

When choosing a location for a dynamic weighing system or scale it’s also important to select a location where acceleration and breaking of trains is reduced to a minimum, weighing a passing train at a more or less steady velocity will generate a reliable measurement. For this reason the chosen location should be as straight, flat and stable as possible.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Relaterade produkter

Behöver du något annat?

3D Wheel Measurement System

The 3D Wheel Measurement System is collecting reliable and accurate data to improve railway maintenance activities and to prevent damage on rail infrastructure.

Visa produkt

Wireless Wheel Load Measurement System

  • Simple (easy to handle by operator)
  • Wireless communication (no cables)
  • Smart software (integrated calculations and reporting)
Visa produkt

FDVKP Automated Wheel Sets Control System

Visa produkt