1. Althensensors
  2. Sensorer
  3. Linjära positionsgivare
  4. Linjära potentiometrar
  5. 18FLPC Series Linear Potentiometer

18FLPC Series Linear Potentiometer

Conductive Plastic Model, shaft with a ball tip and fixing nail mounting to the body


Nyckelfunktioner

  • Industrial conductive plastic model
  • Measurement range: 25 mm and 50 mm
  • Resistance value: 500 Ω to 10 kΩ
  • Linearity tolerance: ±0.5%, ±0.2% and ±0.1%
  • Body dimensions (mm): 18x18x63 or 18x18x68

About the 18FLPC Series Linear Potentiometer

The 18FLPC has a connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft.

In the 18FLPC Series we have the 18FLPCC25RE and the 18FLPCC50RE.

Special Specifications available

Higher resistance value (20kΩ, 50kΩ [50kΩ is available for 18FLPCC50RE only] ), Stroke 75mm (S18FLPCC75), stroke 100mm (S18FLPCC100), stroke 150mm (S18FLPCC150), stroke 200mm (S18FLPCC200), sealed type (IP54, the length of "A" is extended by abt. 12mm), with spring return device (available 75mm & 100mm stroke, friction is approx. 3N [300gf]. Spring return device is mounted on the outer shaft), with a cardan joint (without spring return device). Extra taps (available up to 1 tap and only on the version with a connector). In case of leadwire terminals, the dimensions are as the right drawing: (the dimensions of "A", "B" & "L" are the same as above table), leadwire length is 1m.

Behöver du den här sensorn till ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation Värde
Precision class: ±0.2%, ±0.1%
Contact resistance variation Within 2% C.R.V.
Dielectric strength 1 minute at 500V.A.C.
Friction Within 3N (300gf)
Independent linearity tolerance Standard class: ±0.5%
Insulation resistance Over 1.000MΩ at 500VDC
Mass Approx. 100g, approx. 150g
Output smoothness Within 0.1% against input voltage
Power rating 0.5W, 0.75W
Resistance temperature coefficient ± 400p.p.m./°C
Resolution Essentially infinite
Standard resistance values 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ
Stopper strength Approx. 90N (9kgf)
Stroke 25mm, 50mm
Total resistance tolerance ±10%
With spring return device Fitted (standard)

Relaterade produkter

Behöver du något annat?

CLP Linear Potentiometer

  • Measuring range to 250 mm
  • Resistance 2.5 kΩ to 10 kΩ 
  • For High Cycle Applications
Datablad Visa produkt

CLWG Linear Potentiometer

  • Measuring range to 750 mm 
  • Resistance 3  to 10 
  • For High Cycle Applications
Datablad Visa produkt