NSZ1-IP Tilt Measuring System

---

Nyckelfunktioner

• Measuring range ±3° up to ±60° or 0 … 90°
• Switching accuracy max. 0,5% of measuring range
• Supply voltage 18 … 30 VDC
• Output: 2 potential-free switching contacts (max. 30VDC/0,5A)

---

About the NSZ1-IP Tilt Measuring System

The single axis industrial tilt switching system NSZ1-IP is the combination of a non-contact inclination sensor AccuStar®-EA and sensor adapted electronics. The measuring system is designed for precise tilt monitoring in one axis and intended for side assembly. Available tilt measuring & monitoring ranges are ±3° to ±60° or 0 … 10° to 0 … 90°. By using the build-in potentiometers, which can be seen after removing the case cover, the switching setpoints can be adjusted as needed over the whole measuring range. The relays have potentialfree switching contacts (max. 30 VDC / 0.5 A). The switching delay of the relay is 1 sec at the standard version. Other switching delays possible on request.

The tilt measuring system is built into a robust EMC-safe die-cast aluminium enclosure (IP66), which is well suited for applications in rough and industrial environments

---