CP22E Single-turn Potentiometer
1-Turn Potentiometer, Plastic Housing, Wirewound (Bushingmount)
Nyckelfunktioner
- Wirewound
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.25
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22E Single-turn Potentiometer- Wirewound (Bushingmount)
The CP22E is a low-cost potentiometer with plastic housing and an internationally patented snapping-in construction and side lug terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 6mm dia. and 20mm length), multi-ganged (available up to 10 gangs), with stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) bushing with inch dimensions, special machining on the shaft.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 355º ±5º |
| Independent linearity tolerance | Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kΩ) |
| Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
| Mass | Approx. 20g |
| Max. practical resistance value | 20kΩ |
| Mechanical travel | 360º (Endless) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 0.5W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft diameter (mm) | 6 |
| Standard resistance range | 50Ω to 10kΩ |
| Starting torque | Within 5mN·m (50gf·cm) |
| Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |
Relaterade produkter
Behöver du något annat?
CP22 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 22.23 x 15 mm
- Resistance range 50 Ω to 10 kΩ
CP30 Single-turn Potentiometer
- Wirewound type with ball bearings
- Dimensions (D x L) 27 x 15 mm
- Resistance range 50 Ω to 20 kΩ
CP45 Single-turn Potentiometer
- Servomount type with ball bearings
- Dimensions (D x L) 41 x 18 mm
- Independent linearity ±0.5% to ±0.1%