MPM280 Pressure Sensor

---

Nyckelfunktioner

• Pressure range: 0kPa ~ 35kPa…100MPa
• Gauge, absolute and sealed gauge
• Constant current / Constant Voltages power supply
• Isolated construction to measure various fluid media
• Φ19mm OEM pressure element
• 316L stainless steel material
• Tantalum diaphragm or titanium construction for option
• Different male thread connection optional

---

About the MPM280 Pressure Sensor

MPM280 piezoresistive pressure sensor has a robust housing made of stainless steel, 316L, giving them optimum long-term stability for a range of OEM applications. The stainless steel 316L corrugated diaphragm is welded on the front, separating off the pressure sensing chip, which is made of silicon, from the measuring medium. Every silicon oil-diffused type pressure sensor is measured over the entire pressure and temperature datasheet and is supplied with a specification label.

The outline, installation dimension, and sealing method of General MPM280 are strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and FKM

 

Applications

• Industrial process control
• Level measurement
• Gas, liquid pressure measurement
• Pressure meter
• Pressure calibrator
• Liquid pressure system and switch
• Refrigeration equipment and air conditioner
• Aviation and navigation inspection

Electrical Performance

• Power supply: ≤2.0mA DC;≤10V DC
• Electrical connection: φ0.5mm Kovar pin or 100mm silicon rubber flexible wires
• Common mode voltage output: 50% of input (typ.)
• Input impedance: 3kΩ~8kΩ
• Output impedance: 3.5kΩ~6kΩ
• Response (10%~90%): <1ms
• Insulation resistor: 100MΩ, 100V DC
• Overpressure: 1.5 times FS

Construction Performance

• Diaphragm: stainless steel 316L,Titanium (MPM280Ti),Tantalum (MPM280TH, MPM280TS),
  Hastelloy C(MPM280HH)
• Housing: stainless steel 316L,Titanium (MPM280Ti) Hastelloy C(MPM280TH, MPM280HH)
• Pressure leading tube: stainless steel 316L
• Pin: Kovar
• O-ring: Viton
• Net weight: ~23g(general type, MPM280TH, MPM280TS and MPM280HH)
  ~50g(flush diaphragm)
  ~125g(assembled type)
  ~13.5g (MPM 280Ti)

Environment Condition

• Shock: no change at 10gRMS,(20~2000)Hz
• Impact: 100g, 11ms
• Media compatibility: the gas or liquid which is compatible with construction material and Viton

Basic Condition

• Media temperature: (25±1)℃
• Environment temperature: (25±1)℃
• Shock: 0.1g (1m/s2) Max.
• Humidity: (50%±10%)RH
• Local air pressure: (86~106)kPa
• Power supply: (1.5±0.0015)mADC

---