P6420-xxx-57 Liquid Concrete Pressure Sensor
Abrasive material transducer
Nyckelfunktioner
- Superb chemical and corrosion resistance
- 4-20mA, two wire operation (option 5-21mA)
- Unrivaled abrasion resistance
- Wide temperature range
- High electrical isolation
- Rugged construction
- Excellent long term stability
About the P6420-xxx-57 Liquid Concrete Pressure Sensor
The P6420-57 is a pressure transducer having a two wire, 4-20mA output. It is available in standard ranges from 5 bar to 50 bar, or may be scaled to customer requirements.
The P6420-57 pressure transducer is based on a four active arm strain gauge bridge fused to a high purity ceramic diaphragm, offering high natural output coupled with superb chemical and corrosion resistance. It has been designed primarily for use with concrete slurry and other abrasive fluids and has a cavity free, flush sensing diaphragm covered by a flexible polypropylene shield.
It offers a two wire, 4-20mA output proportional to fluid pressure with other outputs available as options. The sensing element and its associated electronics are housed in a rugged stainless steel case.
Order Code P6420-xxx-57:
xxx = 005 ............ 5 bar sg and g
xxx = 010 ............ 10 bar sg and g
xxx = 020 ............ 20 bar sg and g
xxx = 050 ............ 50 bar sg and g
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Accuracy | 1.0% |
Burst pressure | 3 times rated range minimum |
Electrical connections | Cable |
Environmental protection | IP68 |
Insulation/isolation resistance | >500 MOhm at 500 Vdc, over the operable temperature range |
Loading driving | 1 kOhm @ 28 Vdc supply |
Measurement range | 0 - 5 bar to 0 - 50 bar |
Operating temperature | -25 to +100 °C |
Output | 4 - 20 mA [10 - 32 VDC] |
Pressure type | gauge |
Safe over-range | 1.5 times rated range |
Relaterade produkter
Behöver du något annat?

Z Standard Pressure Transducer
- Measuring range: ~35 mbar to ~4000 bar
- 0.25 % accuracy
- 0.005 % F.S./°F temperature effect

A-5 Absolute Pressure Transducer
- Gauge measuring range: 0 - 35 mbar
- Absolute measuring range: 0,7 - 4100 bar
- 0.50 % accuracy

AGS4000 Standard Pressure Transducer
- Measuring range: 0-500 mbar to 0-700 bar
- With bonded strain gauge technology
- 0.4% Accuracy & ±2 % FS Total Error Band