ALF216 Miniature Load Cell
For use in compression mode
Nyckelfunktioner
- Ranges: 500kg, 1.000kg, 2.000kg, 4.000kg
- Hardened stainless steel body
- High mechanical stiffness
- Flying lead
- Small size
About the ALF216 Miniature Load Cell
The ALF216 load cell is ideally suited to engineering force measurements. It is designed for easy installation, usually between two flat faces bearing on its loading rings. The small size of this loadcell makes it an ideal force sensor for mounting in existing machinery. It has been used in presses and printing machines.
Geometry
Axial strain cylinder in weather sealed case, with raised end load bearing faces. For use in compression.
Behöver du den här sensorn till ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardsensorer, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Bridge resistance | 700 Ω |
| Creep - 20 minutes | ±0.05% AL |
| Excitation voltage - maximum | 20V |
| Excitation voltage - recommended | 10V |
| Hysteresis | ±0.5% RL |
| Insulation resistance - minimum at 50vdc | 500 MΩ |
| Load direction | Compression |
| Measurement range | 500kg, 1000kg, 2000kg, 4000kg |
| Non-linearity - terminal | ±0.5% RL |
| Overload - safe | 50% RL |
| Overload - ultimate | 400% RL |
| Rated output - nominal | 1.2mV/V |
| Rated output - rationalised | 1.0mV/V |
| Rationalisation tolerance | ±0.5% RL |
| Repeatability | ±0.02% RL |
| Sealing | IP65 |
| Temperature effect on rated output per °c | ±0.005% AL |
| Temperature effect on zero load output per °c | ±0.03% RL |
| Temperature range - compensated | -10 to +50°C |
| Temperature range - safe | -10 to +80°C |
| Zero load output | ±4% RL |
Relaterade produkter
Behöver du något annat?
ALF250 Miniature Load Cell
- Measuring range: 10, 20, 40 or 80 kg
- Non-lin./hysteresis: 0.5/0.5% RL
- Tension, compression & bi-directional
ALF251 Miniature Load Cell
- Measuring range: 0 - 10 to 0 - 320 kg
- Sealed to protection grade IP65
- -10 to +80ºC Operating temperature
ALF255 Miniature Load Cell
- Miniature diaphragm loadcell
- Measurement range: 10kg, 20kg, 40kg, 80kg, 160kg, 320kg, 640kg
- Tension, compression and bi-directional