DI-1100 Starter-Kit

Datenerfassung USB DAQ und Datenloggersystem, 12-Bit, 80 kHz

Allgemeine Informationen

Hardware Overview

The DI-1100 is a new release in a long line of low-cost starter kits from DATAQ Instruments. It’s an updated replacement and alternative for the DI-145 USB data acquisition starter kit. Suitable for measuring preamplified analog signals, the DI-1100 in tandem with the included WinDaq software allows real time data acquisition, playback, and analysis performance equal to or better than other products that cost many times its low price. Predecessors of this instrument have been sold to over 35,000 hobbyists and professionals for countless data acquisition applications around the world. The DI-1100 continues this legacy with a higher resolution and faster ADC than its predecessor while retaining its noise-cancelling differential analog inputs that are level-protected to ±100 VDC or peak AC. This is our fastest, most flexible, and value-oriented starter kit ever. The DI-1100 offers four analog input and two discrete (digital) input channels. The analog inputs offer a fixed measurement range of ±10VFS, and are multiplexed to an integrated 12-bit ADC. Digital inputs are protected to ±30 V dc. Sample rates as slow as 20 Hz and as fast as 40 kHz with a single enabled channel are supported.

Software Overview

Model DI-1100 starter kit is provided with comprehensive software support. For point-and-click, ready-to-run applications the DI-1100 is supplied with our popular WinDaq software. WinDaq allows a real time display of any combination of analog channels and the ability to stream acquired data to disk in recorder-like fashion, even at the fastest rate supported by the hardware. This is true streaming performance, continuous, without gaps, and simultaneously to both the real time display and disk. Record only a few readings, or as many as 4 GB. The DI-1100’s two digital inputs are dedicated for remote stop/start and remote event operations using WinDaq software. WinDaq also includes software to review recorded data files, including waveform analysis and data file export to Microsoft Excel and other applications. Sometimes, you need a more focused application. Consider a production application where an instrument makes the same measurements and generates the same results repeatedly. This situation defines the need for a custom program, and the DI-1100 supplies the tools you need to get it done. For Windows applications a .Net class is provided that accesses all DI-1100 measurement features. It’s provided with a comprehensive example program that can act as the foundation for your unique application. For operating systems other than Windows the DI-1100’s device protocol is fully documented.

Eigenschaften

  • Includes a DI-1100 instrument, a 6-foot USB cable, a screwdriver for signal connections, and downloadable WinDaq software
  • Direct replacement for the DI-145 data acquisition start kit
  • Low-cost, Compact USB Data Acquisition Starter Kit
  • Four ±10 V Differential Analog Inputs
  • 12-bit Resolution
  • High sample rates per channel (dependent on the number of channels enabled):
    • 40 kHz, 1 enabled channel
    • 30 kHz, 2 enabled channels
    • 24 kHz, 3 enabled channels
    • 20 kHz, 4 enabled channels
  • 2 Dedicated Digital Inputs
  • Analog inputs are protected to ±100 V
  • Digital inputs are protected to ±30 VDC or peak AC
  • Provided with WinDaq Software
  • .NET class and protocol provided for development in non-Windows operating systems
  • CE approved