E520 Inkrementaldrehgeber
58mm round flange
Key Features E520
- Pulses per revolution: 2 - 25000
- Shaft diameter: 6 or 8 or 10 mm / RE530 11 mm
- Protection degree: IP64 (optional IP 65)
- Operating temp.: -10 ÷ +70ºC
- E520, servo coupling, Ø 58 mm round flange,
- Ø 50 mm centering mask
E520 / E521 - Incremental rotary encoder
Incremental rotary encoders with or without zero pulse, fit to servo-coupling, and compatible to the international standardized series SIZE23; a flange type RE0444 is also available (series RE530). The compact electronic circuitry joins perfectly with the reliable and thoroughly tested mechanical construction, allowing to keep a favourable price/performance relation.
- Produktspezifikationen
- Datenblätter
Produktspezifikationen
Weight
E520 280 g - RE520 320 g - RE530 600 g
Material
Case
E520 ABS self-extinguishing / RE520/RE530 aluminium
Shaft
Stainless steel AISI 303
Resolutions per minute
6000 continuous* /10000 temporary *(Max operating speed with IP65) sealing ring applied on the shaft: 3000 rpm
Starting torque
< 0.8 Ncm
Inertia
≤25 g cm2
Max load
80 N axial / 100 N radial
Vibrations resistance (10÷2000 Hz)
100 m/sec
Shock resistance (11ms)
50 G
Stocking temp.
-20 ÷ 80ºC
Zero reference pulse
1 pulse each resolution
Output Signals
Two square waves 90°±15° out of phase. Zero pulse 90°±15° wide
Electronic output
Push-pull, line-driver, open collector NPN or PNP, pull-up resistor NPN or PNP. Protection against short circuits
Supply
10÷24 Vdc or 5 Vdc±5%. Protection against polarity reversal
Current consumption
30÷80 mA
Max frequency
100 KHz
Connection outlets
Axial or radial connector type MS 7p (10p for line driver output). Axial or radial cable 3 m long (1 m for line driver output)
Datenblätter
Downloads
