REV Inkrementaldrehgeber
Ensures high performances in terms of reading accuracy and signal stability
REV - Incremental encoders
- Pulses per revolution: 1000 - 36000
- Pulse code: Incremental
- Shaft diameter: 6, 8, 9.52 or 10 mm 11 mm
- Protection degree: IP64, optional IP65
- Operating temp.: -30 ÷ +70°C
Features REV
- High resolution
- Different mechanical versions
- Metal case
- Glass disc
- Strong, accurate, reliable
Mechanical versions
Series REV520:
- Ø 58 mm round flange
- Servo coupling
- Ø 50 mm centering mask
- Shaft Ø 6, 8, 9.52 or 10 mm
Series REV510
- Ø 58 mm round flange
- Servo coupling
- Ø 31.75 mm centering mask
- Shaft Ø 6, 8, 9.52 or 10 mm
Series REV540
- Ø 58 mm round flange
- Servo coupling
- Ø 36 mm centering mask
- 3 M4 holes 120° on Ø 48 mm
Series REV530
- Flange type RE0444
- Shaft Ø 11 mm
- Aluminium case
Series REV620:
- 63.5x63.5 square flange
- Ø 31.75 mm centering mask Shaft Ø
- 6, 8, 9,52 or 10 mm
- Produktspezifikationen
- Datenblätter
Produktspezifikationen
Weight
500 g ca.
Materials
Case
Aluminium
Shaft
Stainless steel
Resolutions/minute
6000
Starting torque
≤ 0.8 Ncm
Inertia
≤25 g cm2
Max. load
80 N axial / 1000 N radial
Shock resistance (11 ms)
50 G
Vibrations resistance (10÷2000 Hz)
100 m/sec
Stocking temp.
-30 ÷ +85°C
Zero pulse
One pulse each resolution
Output code
Two square waves 90° ±15° out of phase – Zero pulse width: 90°±15°
Electronic Output
Push-pull, 5Vdc or 8/24Vdc line driver signals protected against short circuits
Supply voltage
5Vdc or 8/24Vdc - protection against polarity reversa
Power consumption
50/70 mA max
Max frequency
200 KHz
Connections outlet
Axial or radial connector equipped with flying part Axial or radial cable - length 3 m (1 m for line driver output)
Datenblätter
Downloads
