FCPS22AC Singleturn Drehgeber

Kostengünstiges Servomontage-Potentiometer mit ölfreiem Metalllager

About the FCPS22AC Single-turn Potentiometer

The FCPS22AC is a low-cost servomount type potentiometer with oil-less metal bearing and rear extended turret terminals.

Features FCPS22AC - Conductive plastic (Servomount oilless metal bearings incorporated)

  • Conductive plastic
  • Dimensions D x L (mm): 22x20
  • Standard Resistance Range 1 to 10 kilo ohm
  • Independent Linearity (± %): 1 to 0.5
  • Mechanical travel (+10° 0°): 360°
  • Electrical travel (±5°): 320° ±5°

Special Specifications Available

Extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm), special machining on the shaft, with ball bearings incorporated.

Produktspezifikationen

Shaft diameter (mm)
6
Standard Resistance Values
1k, 2k, 5k, 10 k (O)
Special Practical resistance Values
500, 20k, 50k, 100k (O)
Total resistance tolerance
Standard Class ±15% (L), Precision Class ±10% (K)
Independent linearity tolerance
Standard Class ±1.0%, Precision Class ±0.5%
Resolution
Essentially infinite
Output Smoothness
Within 0.1% against input voltage
Contact Resistance Variation
Within 2% C.R.V.
Power Rating
1.0W
Electrical Travel
320º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 500 V.D.C
Dielectric Strength
1 minute at 500 V.A.C.
Starting Torque
Within 5mN·m (50gf·cm)
Resistance temp. coefficient
±400p.p.m./ºC
Mass
Approx. 30g